FDL-PCI

Installation Instruction for Windows 2000/XP
====================================
Start menu | Settings | Control Panel | System
Tab: Hardware
Click Button: Device Manager
Menu: View | Devices by connection
In Tree: Standard PC | PCI bus | <your card>="">
Menu: Action | Properties
Tab: Driver
Click Button: Update Driver
In Wizard click button: Next
Radio selection: Search for a suitable driver for my device
Click Button: Next
Check box selection: only "Specify a location"
Click Button: Next
...\DASxxx\DRIVERS\DTA\FDL-PCI (with xxx DAS version)
If the INF file was detected:
Click Button: OK
If a dialog box regarding digital signature appears, disregard it and click "next" to continue
If a dialog box asking to enter the path of "windrvr6.sys" appears enter the following path <\WINNT\system32\drivers\>
Otherwise
Check box "Install one of the other drivers"
Choose your INF file
Click Button: Next
Click Button: Finish
Reboot

USB2

<CENTER>
<SMALL>
    <I>
        ############################################################################
    </I>
</SMALL>
</CENTER>

AD PC104 converter

\image html dmm.jpg

In the directory
"...\DASxxx\DRIVERS\DMM\"
select and execute DSCUDInstall.exe
The Diamond Systems Corporation Universal Driver (DSCUD) install both the kernel-mode and user-mode resources you'll need in order to develop and run DSCUD-based applications.The kernel-mode (system) files differ depending on your platform. This installer automatically detects the proper files and directories, this is only for your information:
If you are using a version of Windows NT, 2000 or XP, this will install:
windrvr.sys, dscudkp.sys => "C:
The installer will register these devices so that they will begin automatically when Windows boots.
At the next screen, you will have the option to install only the files mentioned above (check the box) or to install both the system files and the developer files (uncheck the box). If installed, the developer files will be copied to the directory of your choice, and will include all files needed to create a DSCUD application on every platform we support. If you are an end user and do not need the developer files, check the box indicating this choice. You can find the dscud55.dll file in the dll directory. Remember, the directory you choose at the following screen is for the developer tools only.
The system files will be put in the proper location automatically.

Port32 I/O

If at the first Execution of the program you receive an error like:

"This application has failed to start because PortIO32.dll was not found....."

You have to install the PortIO drivers located in the "..\IO_Port32\win\driver" directory in the root dir of DASxxx (i.e. "C:\Program Files\DASxxx", where xxx is the DAS version)
To install the driver proceed as explained below:

Start –> Settings –> Control Panel –> Add Hardware –> Next –>
Select "Yes, I have already connected....." –> Next
Select "Add a new hardware device" –> Next
Select "Install the Hardware that I manually select from a list (Advanced)" –> Next
Wait for a while!!!! then –> Next
select "Show all devices" –> Next
Wait again for a while (it takes some minutes,3-5)
Select the button "Have disk" and Browse the "...DRIVERS\IO_Port32\win\driver"
folder. Select "portio32.inf" file. Press "open" and then "OK".
Finally select the "PortIO32 Port I/O Driver" and press "Next".
One more "Next" and then "Finish".
Now You can run the DAS program.

NOVA Drivers

After the OS installation please update the system and provide the drivers for the NOVA monoboard installed: The NOVA drivers are located in the folder "...DASxxx\DRIVERS\NOVA_Drivers". In the "\SingleBoardComputer" folder there are 3 subfolder for the monoboard model can be used with DAS:

7892 - The oldest one equipping LIS, TROPOGAS, GASCODNG2, GASCODNG3
6612 - a good candidate for the 7892 replacement, but not used
945GSE - the new monoboard installed on SPATRAMPLUS, SPATRAM2, GASCODNG1, GASCODNG4

Depending on the equipment the right folder has to be used :-)
For the SPATRAMPLUS, SPATRAM2, GASCODNG1 and GASCODNG4 instrument (with the 945GSE) an additional driver for the control of the monoboard I/O ports has to be installed. Inthe folder .."\NOVA_Drivers\SuperIO\ISMM" please run the file "iSMM EN V1.13.05.msi"